Built in Transducer : Digital Power Factor Meter

id_pg271-1

Description:

 

It incorporates solid state circuitry with micro-controller to measure Power Factor of Single Phase and Three Phase system.

Download 

Features:

  • The Meter does not require external transducer. Hence panel wiring is reduced.
  • “__” sign indicates lagging PF (only for model PFD 65101 & 66301).
  • Glowing of “Reverse LED” for reversal of current (only for model PFD 65102, 66302, 67302, 68302).

ELECTRICAL SPECIFICATIONS:

  • TYPE :1 Ph/3 Ph-1 EL/3 Ph-2 EL-3 W/ 3 Ph-3 EL-4 W
  • INPUT VOLTAGE : 63.5V/110V/240V/440V
  • INPUT CURRENT : 1A/5A
  • ACCURACY : ± 2°
  • AUXILIARY SUPPLY : 110V./240V. ±10% 50/60 Hz
  • VA BURDEN : Voltage : 2VA, Current : 0.5VA, Aux. Supply : 3 VA
  • DISPLAY COLOUR : Red , (Green On request.)
  • DISPLAY TYPE : 4 Digit, Seven Segment, 12.5mm LED Display
  • RESOLUTION : 0.001
  • RANGE : 0.1Lag-1-0.1Lead
  • INSULATION RESISTANCE : Greater than 20M Ω at 500V DC
  • DIELECTRIC TEST : 2kV RMS for 1 minute.
  • OPERATING TEMP. : 0°C to 55°C
  • STORAGE TEMP. : -20°C to 70°C
  • HUMIDITY : Up to 95% RH
  • PROTECTION : IP 30

Mechanical Specifications:

id_pg27_tbl

Dimensions:

id_pg281
id_pg282

Terminal Connections :

id_pg28_tbl1
id_pg28_tbl2

Typical Wiring Diagram :

id_pg283
id_pg284