RMS measurement of maximum current, 20% overload capacity, Long current peaks are registered, Instantaneous current measurement, Red pointer to indicate maximum current reached, Sturdy movement, Analogue Indication.

Meter incorporates a microcontroller which samples voltage and current signals and computes several parameters. It can replace 12 meters thereby saving space on panel and cost of several meters.

‘SELECT’ push-button on front side to select Voltage, Frequency, Current, Power Factor, Active Power, Reactive Power & Apparent Power. One meter replaces seven meters. Complex wiring & panel space required are reduced. Sign Indication depends upon current direction, “– “ sign / no sign indication for EXPORT / IMPORT respectively for Active / Reactive Power. “– “ sign / no sign indication for LAG / LEAD respectively for Power Factor.

‘‘SELECT’ push-button on front side to select various parameters i.e. Voltage (phase to neutral / phase to phase), Frequency, Current, Power Factor, Active Power, Reactive Power & Apparent Power. ‘MODE’ push-button on front side to select indication on respective phases i.e. L1, L2, L3 and Summation S. One meter replaces minimum of eleven meters on panel. Complex wiring & panel space required are reduced. ‘0.000’ indication when auxiliary supply is on. ‘PFEr’ indication when input current is not applied. ‘ErLo’ indication when input signal voltage is not applied. “– – – –“ Frequency indication on Σ mode when any one of phase voltage signal is absent. Sign Indication depend upon current direction, “– “ sign / no sign indication for EXPORT / IMPORT respectively for Active / Reactive Power. “– “ sign / no sign indication for LAG / LEAD respectively for Power Factor. Auto scrolling by pressing ‘MODE’ & ‘SELECT’ push buttons simultaneously.