DIGITAL POWER FACTOR METER

Products > Meter Division > Digital Power Factor Meter

Digital power factor meter

Description :

It incorporates solid state circuitry with micro-controller to measure Power Factor of single phase and three phase system.

Features :

  • The Meter does not require external transducer, hence panel wiring is reduced.
  • Absence of current is indicated by “Err”
  • Negative sign indicates lagging P.F.

Electrical Specifications :

Type : Single phase/Three phase single element
Operation Voltage : 63.5V/110V/240V/440V., 2VA.
Operating Current : 1A/5A, 0.5VA.
Resolution : 0.001
Range : 0.1 Lag - 1 - 0.1 Lead
Accuracy : 2
Auxillary Supply : 110V / 240V , 50 / 60 Hz, 3VA.
Insulation Resistance : Greater than 20 Mohms at 500V DC
Dielectric Strength : 2kV RMS for 1 minute.
Operating Temp : 0°C to 55°C .
Storage Temp : -20°C to 70°C.
Humidity : Up to 95% RH.
Display Color : Red

Mechanical Specification :

ModelPFH 96 DPFF 96 DPFH 144 DPFF 144 D
Size (mm)48 X 96 X 14096 X 96 X13572 X 144 X 130144 X 144 X 130
Panel Cutut (mm)45+0.6 X 92+0.892 X 92+0.868+0.7 X 138+1.0138 X 138 +1.0
Weight (Approx.)550 gms800 gms900 gms850 gms

Note : Presently model PFH 96 D is available.

Ordering Information :

1) Type 2) Model 3) Operating voltage 4) Operating current 5) Range 6) Auxiliary supply