BUILT IN TRANSDUCER DIGITAL POWER METER

ID_Pg29

Description :

‘AE’ Built in Transducer type Digital Power Meter is equipped with a measuring transducer & Digital indicator. It measures Active, Reactive & Apparent power in Single Phase & Three Phase system.

 

Features : The Meter doesn’t require external transducer, hence panel wiring is reduced.

Electrical Specifications :

  • Type : Active, Reactive & Apparent Power. 1 Ph / 3 Ph — 2 EL — 3 W / 3 Ph — 3 EL — 4 W
  • Input Voltage : 110V/240V/415V/440V.
  • Input Current : 1A/5A
  • Operating frequency : 50Hz or 60Hz
  • Measuring Unit : Active Power : W, kW, MW.
  • Reactive Power : Var, kVar, MVar.
  • Apparent Power : VA, kVA, MVA
  • Accuracy : ± 0.5% of full scale deflection ± 2 Digits
  • Aux Supply : 110V /240V AC, 50 Hz
  • VA Burden : Voltage : 3 VA
  • Current : 1 VA
  • Aux. Supply : 4 VA
  • Display Colour : Red . (Green On request.)
  • Insulation Resistance : Greater than 20M Ω at 500V DC
  • Dielectric Test : 2kV RMS for 1 minute.
  • Operating Temp : 0°C to 55°C
  • Storage Temp. : -20°C to 70°C
  • Humidity : Up to 95% RH
ID_Pg30_tbl1

Mechanical Specifications :

ID_Pg30(1)

Terminal Connections :

ID_Pg30_tbl2

Typical Wiring Diagram :

ID_Pg30(2)

Ordering Information :

1) Model 2) Active, Reactive & Apparent Power 3) Resolution 4) PTR (if any) 5) CTR (if any) 6) Full Scale Indication.