BUILT IN TRANSDUCER ANALOG POWER METER

ID_Pg7(2)

Download  

Description :

‘AE’ Built in Transducer type Power Meter is equipped with a measuring transducer & a moving coil movement. It measures Active, Reactive & Apparent power in Single Phase & Three Phase system.

Features :

  • The meter doesn’t require external transducer, hence panel wiring is reduced.
  • Auxiliary supply is not required (Self – Powered).

Electrical Specifications :

  • TYPE:Active, Reactive & Apparent Power. 1 Ph / 3 Ph — 2 EL — 3 W / 3 Ph — 3 EL — 4 W
  • INPUT VOLTAGE : 110V / 240V / 415V / 440V.
  • INPUT CURRENT : 1A/5A
  • INPUT FREQUENCY: 50Hz. or 60Hz.
  • MEASURING RANGEActive Power :W, kW, MW 
  1. Reactive Power:Var, kVar, MVar 
  2. Apparent Power:VA, kVA, MVA
  • ACCURACY: ±1.5% of full scale range
  • VA BURDEN: Voltage : 3VA, Current : 1VA
  • INSULATION RESISTANCE: Greater than 20M Ω at 500V DC
  • DIELECTRIC TEST: 2kV RMS for 1 minute.
  • OPERATING TEMP.: 0°C to 55°C
  • STORAGE TEMP.: -20°C to 70°C
  • HUMIDITY: Up to 95% RH
  • CONFORMS TO: I.S. 1248 / I.E.C. 60051(Part 3).

Ordering information:

1) Type 2) Size 3) Model4) Active, Reactive or Apparent Power 5) Current with CTR if applicable 6) Voltage with PTR if applicable 7) Full scale indication.