| FEATURES |
• |
‘‘SELECT’
push-button on front side to select various parameters i.e. Voltage (phase
to neutral / phase to phase), Frequency, Current, Power Factor, Active Power,
Reactive Power & Apparent Power.
|
| • |
‘MODE’ push-button
on front side to select indication on respective phases i.e. L1, L2, L3
and Summation Σ. |
| • |
One meter replaces
minimum of eleven meters on panel. |
| • |
Complex wiring &
panel space required are reduced. |
| • |
‘0.000’
indication when auxiliary supply is on. |
| • |
‘PFEr’
indication when input current is not applied. |
| • |
‘ErLo’
indication when input signal voltage is not applied. |
| • |
“– –
– –“ Frequency indication on Σ mode when any one
of phase voltage signal is absent.
Sign Indication depend upon current direction,
“– “
sign / no sign indication for EXPORT / IMPORT respectively for Active /
Reactive Power.
“– “
sign / no sign indication for LAG / LEAD respectively for Power Factor.
|
| • |
Auto scrolling by pressing
‘MODE’ & ‘SELECT’ push buttons simultaneously. |
| ELECTRICAL
SPECIFICATIONS |
| • |
TYPE :
|
: 3 Ph
– 2 EL – 3W / 3 Ph – 3 EL – 4 W |
| • |
SENSING
|
: True
RMS |
| • |
INPUT
VOLTAGE |
: 110 V
/ 440 V |
| • |
INPUT
CURRENT |
: 1A /
5A (2% to 100% of nominal) |
| • |
OPERATING
POWER FACTOR |
: 0.1 (Lag
) - 1.00 - 0.1 (Lead) |
| • |
OPERATING
FREQUENCY |
: 45 Hz
to 55 Hz. |
| • |
ACCURACY |
: Voltage / Current
/ Power
|
: ± 0.5% / 1.0%
of Full-scale |
| Frequency
|
: ± 0.2% of
Centre Frequency |
| Power Factor
|
: ± 2° |
| • |
AUX. SUPPLY
|
: 110 /
240V ? 10%, 50 / 60Hz |
| • |
VA
BURDEN |
: Voltage
|
: 0.5 VA |
| Current |
: 0.5 VA |
| Aux. Supply |
: 5 VA |
| • |
DISPLAY COLOUR |
: Red |
| • |
DISPLAY TYPE |
: 4 Digit,
7 Segment, LED display |
| • |
INSULATION RESISTANCE
|
: Greater
than 20M? at 500VDC |
| • |
DIELECTRIC TEST |
: 2kV RMS
for 1 min. |
| • |
OPERATING TEMPERATURE |
: 0°
C to 55°C. |
| • |
STORAGE TEMPERATURE |
: -20°
C to 70°C. |
| • |
HUMIDITY |
: Upto
95% RH. |
